GrowShop editorial guide
Wat is het verschil tussen pH- en EC-meters?
pH beschrijft de zuurgraad of alkaliteit; EC geeft een indirecte indicatie van de geleidbaarheid en het totaal aantal opgeloste ionen. Het een vervangt het ander niet.
Wat meten pH en EC?
De pH geeft de zuurgraad of alkaliteit aan, wat de beschikbaarheid van voedingsstoffen beïnvloedt. EC meet de geleidbaarheid van ionen in de oplossing; het identificeert geen individuele voedingsstoffen.
Geschikte waarden variëren per plant, groeifase, bronwater en systeem. Er is geen universele streefwaarde.
Controlelijst voor meterselectie
- Vervangbare of te onderhouden sonde
- Geschikte kalibratieoplossingen
- Duidelijke uitleg over temperatuurcompensatie
- Meetbereik en resolutie
- Bewaar- en reinigingsinstructies
- Garantie en reserveonderdelen
Bouw een betrouwbare meetgewoonte op
Kalibreer zoals aangegeven, reinig en bewaar de sonde op de juiste manier, en noteer de meetwaarden met datum en tijd. Door het bronwater afzonderlijk van de bereide voedingsoplossing te meten, zijn veranderingen gemakkelijker te interpreteren.
pH, EC and TDS at a glance
| Reading | Meaning | Limit |
|---|---|---|
| pH | Acidity or basicity | Not the nutrient amount |
| EC | Electrical conductivity | Not the concentration of each nutrient |
| TDS / ppm | Estimate converted from EC | Requires the meter's conversion scale |
References: Uitbreiding van de Oklahoma State University; Bluelab
Units and conversion scales
1 mS/cm equals 1,000 µS/cm. For 1.0 mS/cm, a ppm-500 meter displays 500 ppm and a ppm-700 meter displays 700 ppm. The same solution can therefore have different ppm readings. Record the scale with the result.
References: Bluelab
Resolution, accuracy and probe maintenance
Resolution is the smallest displayed increment; it does not establish measurement accuracy. Compare both specifications, the replaceable probe and access to consumables.
Follow the model's calibration and storage instructions. Some conductivity meters need verification rather than user calibration. For OnePen, Bluelab specifies KCl storage and a hydrated, clean pH probe; do not generalise one model's procedure to every probe.
References: Bluelab; Bluelab Support
Before interpreting a measurement
- Record source-water and prepared-solution readings separately.
- Record the date, temperature, unit and calibration or verification status.
- A similar EC can hide different nutrient balances; diagnosis may require water analysis.
- Use crop, growth stage, water and system information rather than one universal pH/EC target.
References: Uitbreiding van de Oklahoma State University
Sources
Technical explanations on this page are independent summaries based on the institutional sources below.
Editorial method
GrowShop does not recommend a particular product or store. Content is reviewed for source freshness, technical consistency, and direct usefulness.
Report a correction or removal request