GrowShop editorial guide
В чем разница между pH-метрами и EC-метрами?
pH описывает кислотность или щелочность; EC обеспечивает косвенное указание проводимости и общего количества растворенных ионов. Одно не заменяет другое.
Что измеряют pH и EC?
pH указывает на кислотность или щелочность, которая влияет на доступность питательных веществ. EC измеряет проводимость ионов в растворе; он не идентифицирует отдельные питательные вещества.
Подходящие значения варьируются в зависимости от растения, стадии роста, источника воды и системы. Универсального целевого значения не существует.
Контрольный список выбора счетчика
- Сменный или исправный зонд
- Подходящие решения для калибровки
- Понятное объяснение температурной компенсации
- Диапазон измерения и разрешение
- Инструкции по хранению и очистке
- Гарантия и запасные части
Выработайте привычку к надежным измерениям
Выполняйте калибровку в соответствии с указаниями, правильно очищайте и храните датчик, а также записывайте показания с указанием даты и времени. Измерение исходной воды отдельно от приготовленного питательного раствора облегчает интерпретацию изменений.
pH, EC and TDS at a glance
| Reading | Meaning | Limit |
|---|---|---|
| pH | Acidity or basicity | Not the nutrient amount |
| EC | Electrical conductivity | Not the concentration of each nutrient |
| TDS / ppm | Estimate converted from EC | Requires the meter's conversion scale |
References: Расширение Университета штата Оклахома; Bluelab
Units and conversion scales
1 mS/cm equals 1,000 µS/cm. For 1.0 mS/cm, a ppm-500 meter displays 500 ppm and a ppm-700 meter displays 700 ppm. The same solution can therefore have different ppm readings. Record the scale with the result.
References: Bluelab
Resolution, accuracy and probe maintenance
Resolution is the smallest displayed increment; it does not establish measurement accuracy. Compare both specifications, the replaceable probe and access to consumables.
Follow the model's calibration and storage instructions. Some conductivity meters need verification rather than user calibration. For OnePen, Bluelab specifies KCl storage and a hydrated, clean pH probe; do not generalise one model's procedure to every probe.
References: Bluelab; Bluelab Support
Before interpreting a measurement
- Record source-water and prepared-solution readings separately.
- Record the date, temperature, unit and calibration or verification status.
- A similar EC can hide different nutrient balances; diagnosis may require water analysis.
- Use crop, growth stage, water and system information rather than one universal pH/EC target.
References: Расширение Университета штата Оклахома
Sources
Technical explanations on this page are independent summaries based on the institutional sources below.
Editorial method
GrowShop does not recommend a particular product or store. Content is reviewed for source freshness, technical consistency, and direct usefulness.
Report a correction or removal request